Dana 60 axles are legendary for their strength and reliability. They feature a large 9.75" ring gear with many models also coming standard with heavy duty 35 spline axle shafts. Dana 60 axles have been used under cars, trucks, and SUVs for decades in numerous front and rear configurations. Please review the ring and pinion gear specifications below to find the correct part number for your application.
Note that all Dana 60 axles feature a 4.10/4.56 carrier break. Differentials designed for 4.30 and numerically lower gears require "thick" gears for 4.56 and higher ratios. Differentials built for 4.56 and numerically higher ratios require standard (non-thick) gears and will not work with 4.30 and lower gears. (For more information and carrier breaks, click here.)
All front and rear low pinion Dana 60 axles (pinion gear enters below the axle center line) use standard rotation gears. The following gears are a direct replacement for standard rotation Dana 60 axles:
Part Number | Gear Ratio | Rotation | Carrier | Notes | Shop |
---|---|---|---|---|---|
CRG-D60-354 | 3.54 | Standard | 4.10 & Down | Check Price | |
CRG-D60-373 | 3.73 | Standard | 4.10 & Down | Check Price | |
CRG-D60-410 | 4.10 | Standard | 4.10 & Down | Check Price | |
CRG-D60-456 | 4.56 | Standard | 4.56 & Up | Check Price | |
CRG-D60-488 | 4.88 | Standard | 4.56 & Up | Check Price | |
CRG-D60-513 | 5.13 | Standard | 4.56 & Up | Check Price | |
CRG-D60-538 | 5.38 | Standard | 4.56 & Up | Check Price |
Thick ring and pinion gears are available to run a higher gear ratio that is above the axle carrier break without replacing the differential. The following gears are availble for any standard rotation Dana 60 with a 4.10 and down differential carrier:
Part Number | Gear Ratio | Rotation | Carrier | Notes | Shop |
---|---|---|---|---|---|
CRG-D60-456-T | 4.56 | Standard | 4.10 & Down | Check Price | |
CRG-D60-488-T | 4.88 | Standard | 4.10 & Down | Check Price | |
CRG-D60-513-T | 5.13 | Standard | 4.10 & Down | Check Price |
The above standard rotation Dana 60 gears fit the following axles and vehicle applications:
Dana 60 high pinion (pinion gear enters above axle center line) front axles used unders Ford trucks require reverse rotation ring and pinion gears. The following gears are a direct replacement for high pinion Dana 60 front axles:
Part Number | Gear Ratio | Rotation | Carrier | Notes | Shop |
---|---|---|---|---|---|
CRG-D60-410-R | 4.10 | Reverse | 4.10 & Down | Also Fits Dana Super 60 | Check Price |
CRG-D60-456-RT | 4.56 | Reverse | 4.10 & Down | Also Fits Dana Super 60 | Check Price |
CRG-D60-488-R | 4.88 | Reverse | 4.56 & Up | Also Fits Dana Super 60 | Check Price |
CRG-D60-488-RT | 4.88 | Reverse | 4.10 & Down | Also Fits Dana Super 60 | Check Price |
CRG-D60-538-R | 5.38 | Reverse | 4.56 & Up | Also Fits Dana Super 60 | Check Price |
CRG-D60-538-RT | 5.38 | Reverse | 4.10 & Down | Also Fits Dana Super 60 | Check Price |
The above reverse rotation Dana 60 gears fit the following axles and vehicle applications: